Skip to main content
Version: 1.7.0

MySQL-CDC

Overview

The MySQL Extract Node allows for reading snapshot data and incremental data from MySQL database. This document describes how to set up the MySQL Extract Node to run SQL queries against MySQL databases.

Supported Version

Extract NodeVersionDriver
MySQL-CDCMySQL: 5.6, 5.7, 8.0.x
RDS MySQL: 5.6, 5.7, 8.0.x
PolarDB MySQL: 5.6, 5.7, 8.0.x
Aurora MySQL: 5.6, 5.7, 8.0.x
MariaDB: 10.x
PolarDB X: 2.0.1
JDBC Driver: 8.0.21

Dependencies

In order to set up the MySQL Extract Node, the following table provides dependency information for both projects using a build automation tool (such as Maven or SBT) and SQL Client with Sort Connectors JAR bundles.

Maven dependency

<dependency>
<groupId>org.apache.inlong</groupId>
<artifactId>sort-connector-mongodb-cdc</artifactId>
<version>1.7.0</version>
</dependency>

The MySQL driver dependency is also required to connect to MySQL database. Please download mysql-connector-java-8.0.21.jar and put it into FLINK_HOME/lib/.

Setup MySQL server

You have to define a MySQL user with appropriate permissions on all databases that the Debezium MySQL connector monitors.

  1. Create the MySQL user:
mysql> CREATE USER 'user'@'localhost' IDENTIFIED BY 'password';
  1. Grant the required permissions to the user:
mysql> GRANT SELECT, SHOW DATABASES, REPLICATION SLAVE, REPLICATION CLIENT ON *.* TO 'user' IDENTIFIED BY 'password';

Note: The RELOAD permissions is not required any more when scan.incremental.snapshot.enabled is enabled (enabled by default).

  1. Finalize the user’s permissions:
mysql> FLUSH PRIVILEGES;

See more about the permission explanation.

Notes

Set a different SERVER ID for each reader

Every MySQL database client for reading binlog should have an unique id, called server id. MySQL server will use this id to maintain network connection and the binlog position. Therefore, if different jobs share a same server id, it may result to read from wrong binlog position. Thus, it is recommended to set different server id for each reader via the SQL Hints, e.g. assuming the source parallelism is 4, then we can use SELECT * FROM source_table /*+ OPTIONS('server-id'='5401-5404') */ ; to assign unique server id for each of the 4 source readers.

Setting up MySQL session timeouts

When an initial consistent snapshot is made for large databases, your established connection could timeout while the tables are being read. You can prevent this behavior by configuring interactive_timeout and wait_timeout in your MySQL configuration file.

  • interactive_timeout: The number of seconds the server waits for activity on an interactive connection before closing it. See MySQL documentations.
  • wait_timeout: The number of seconds the server waits for activity on a noninteractive connection before closing it. See MySQL documentations.

How to create a MySQL Extract Node

Usage for SQL API

The example below shows how to create an MySQL Extract Node with Flink SQL :

-- Set checkpoint every 3000 milliseconds                       
Flink SQL> SET 'execution.checkpointing.interval' = '3s';

-- Create a MySQL table 'mysql_extract_node' in Flink SQL
Flink SQL> CREATE TABLE mysql_extract_node (
order_id INT,
order_date TIMESTAMP(0),
customer_name STRING,
price DECIMAL(10, 5),
product_id INT,
order_status BOOLEAN,
PRIMARY KEY(order_id) NOT ENFORCED
) WITH (
'connector' = 'mysql-cdc-inlong',
'hostname' = 'YourHostname',
'port' = '3306',
'username' = 'YourUsername',
'password' = 'YourPassword',
'database-name' = 'YourDatabaseName',
'table-name' = 'YourTableName');

-- Read snapshot and binlogs from mysql_extract_node
Flink SQL> SELECT * FROM mysql_extract_node;

Usage for InLong Dashboard

  • Choose the BINLOG Data Source MySQL BINLOG

  • Configure the MySQL Source MySQL SOURCE

Usage for InLong Manager Client

TODO: It will be supported in the future.

MySQL Extract Node Options

OptionRequiredDefaultTypeDescription
connectorrequired(none)StringSpecify what connector to use, here should be 'mysql-cdc-inlong'.
hostnamerequired(none)StringIP address or hostname of the MySQL database server.
usernamerequired(none)StringName of the MySQL database to use when connecting to the MySQL database server.
passwordrequired(none)StringPassword to use when connecting to the MySQL database server.
database-namerequired(none)StringDatabase name of the MySQL server to monitor. The database-name also supports regular expressions to monitor multiple tables matches the regular expression.
table-namerequired(none)StringTable name of the MySQL database to monitor. The table-name also supports regular expressions to monitor multiple tables matches the regular expression.
portoptional3306IntegerInteger port number of the MySQL database server.
server-idoptional(none)IntegerA numeric ID or a numeric ID range of this database client, The numeric ID syntax is like '5400', the numeric ID range syntax is like '5400-5408', The numeric ID range syntax is recommended when 'scan.incremental.snapshot.enabled' enabled. Every ID must be unique across all currently-running database processes in the MySQL cluster. This connector joins the MySQL cluster as another server (with this unique ID) so it can read the binlog. By default, a random number is generated between 5400 and 6400, though we recommend setting an explicit value.
scan.incremental.snapshot.enabledoptionaltrueBooleanIncremental snapshot is a new mechanism to read snapshot of a table. Compared to the old snapshot mechanism, the incremental snapshot has many advantages, including: (1) source can be parallel during snapshot reading, (2) source can perform checkpoints in the chunk granularity during snapshot reading, (3) source doesn't need to acquire global read lock (FLUSH TABLES WITH READ LOCK) before snapshot reading. If you would like the source run in parallel, each parallel reader should have an unique server id, so the 'server-id' must be a range like '5400-6400', and the range must be larger than the parallelism. Please see Incremental Snapshot Readingsection for more detailed information.
scan.incremental.snapshot.chunk.sizeoptional8096IntegerThe chunk size (number of rows) of table snapshot, captured tables are split into multiple chunks when read the snapshot of table.
scan.snapshot.fetch.sizeoptional1024IntegerThe maximum fetch size for per poll when read table snapshot.
scan.startup.modeoptionalinitialStringOptional startup mode for MySQL CDC consumer, valid enumerations are "initial" and "latest-offset". Please see Startup Reading Positionsection for more detailed information.
server-time-zoneoptionalUTCStringThe session time zone in database server, e.g. "Asia/Shanghai". It controls how the TIMESTAMP type in MYSQL converted to STRING. See more here.
debezium.min.row. count.to.stream.resultoptional1000IntegerDuring a snapshot operation, the connector will query each included table to produce a read event for all rows in that table. This parameter determines whether the MySQL connection will pull all results for a table into memory (which is fast but requires large amounts of memory), or whether the results will instead be streamed (can be slower, but will work for very large tables). The value specifies the minimum number of rows a table must contain before the connector will stream results, and defaults to 1,000. Set this parameter to '0' to skip all table size checks and always stream all results during a snapshot.
connect.timeoutoptional30sDurationThe maximum time that the connector should wait after trying to connect to the MySQL database server before timing out.
connect.max-retriesoptional3IntegerThe max retry times that the connector should retry to build MySQL database server connection.
connection.pool.sizeoptional20IntegerThe connection pool size.
jdbc.properties.*optional20StringOption to pass custom JDBC URL properties. User can pass custom properties like 'jdbc.properties.useSSL' = 'false'.
heartbeat.intervaloptional30sDurationThe interval of sending heartbeat event for tracing the latest available binlog offsets.
append-modeoptionalfalseBooleanWhether to support append only, if true the MySQL Extract Node will Convert all upsert streams to append streams to support downstream scenarios where upsert streams are not supported.
migrate-alloptionalfalseBooleanWhether it is a full database migration scenario, if it is 'true', MySQL Extract Node will compress the physical fields and other meta fields of the table into 'json'. The special 'data' meta field of the format, currently supports two data formats, if you need data in 'canal json' format, then use the 'data_canal' metadata field, or use the 'data_debezium' metadata field if data in 'debezium json' format is required.
row-kinds-filteredoptionalfalseBooleanThe specific operation type that needs to be retained, where +U corresponds to the data before the update, -U corresponds to the updated data, and +I corresponds to the data before the update. Inserted data (the existing data is the data of the insert type), -D represents the deleted data, if you want to keep multiple operation types, use & connection. For example +I&-D, the connector will only output the inserted and deleted data, and the updated data will not be output.
debezium.*optional(none)StringPass-through Debezium's properties to Debezium Embedded Engine which is used to capture data changes from MySQL server. For example: 'debezium.snapshot.mode' = 'never'. See more about the Debezium's MySQL Connector properties
inlong.metric.labelsoptional(none)StringInlong metric label, format of value is groupId=[groupId]&streamId=[streamId]&nodeId=[nodeId].

Available Metadata

The following format metadata can be exposed as read-only (VIRTUAL) columns in a table definition.

KeyDataTypeDescription
meta.table_nameSTRING NOT NULLName of the table that contain the row.
meta.database_nameSTRING NOT NULLName of the database that contain the row.
meta.op_tsTIMESTAMP_LTZ(3) NOT NULLIt indicates the time that the change was made in the database.
If the record is read from snapshot of the table instead of the binlog, the value is always 0.
meta.op_typeSTRINGType of database operation, such as INSERT/DELETE, etc.
meta.data_canalSTRING/BYTESData for rows in `canal-json` format only exists when the `migrate-all` option is 'true'.
meta.data_debeziumSTRING/BYTESData for `debezium-json` formatted lines only exists if the `migrate-all` option is 'true'.
meta.is_ddlBOOLEANWhether the DDL statement.
meta.tsTIMESTAMP_LTZ(3) NOT NULLThe current time when the row was received and processed.
meta.sql_typeMAPMapping of sql_type table fields to java data type IDs.
meta.mysql_typeMAPStructure of the table.
meta.pk_namesARRAYPrimay key name of the table.
meta.batch_idBIGINTBatch id of the Binlog.
meta.update_beforeARRAYData of the row before update.

The extended CREATE TABLE example demonstrates the syntax for exposing these metadata fields:

CREATE TABLE `mysql_extract_node` (
`id` INT,
`name` STRING,
`database_name` string METADATA FROM 'meta.database_name',
`table_name` string METADATA FROM 'meta.table_name',
`op_ts` timestamp(3) METADATA FROM 'meta.op_ts',
`op_type` string METADATA FROM 'meta.op_type',
`batch_id` bigint METADATA FROM 'meta.batch_id',
`is_ddl` boolean METADATA FROM 'meta.is_ddl',
`update_before` ARRAY<MAP<STRING, STRING>> METADATA FROM 'meta.update_before',
`mysql_type` MAP<STRING, STRING> METADATA FROM 'meta.mysql_type',
`pk_names` ARRAY<STRING> METADATA FROM 'meta.pk_names',
`data` STRING METADATA FROM 'meta.data_canal',
`sql_type` MAP<STRING, INT> METADATA FROM 'meta.sql_type',
`ingestion_ts` TIMESTAMP(3) METADATA FROM 'meta.ts',
PRIMARY KEY (`id`) NOT ENFORCED
) WITH (
'connector' = 'mysql-cdc-inlong',
'hostname' = 'YourHostname',
'migrate-all' = 'true',
'port' = '3306',
'username' = 'YourUsername',
'password' = 'YourPassword',
'database-name' = 'YourDatabase',
'table-name' = 'YourTable',
'row-kinds-filtered' = '+I'
);

Data Type Mapping

MySQL typeFlink SQL typeNOTE
TINYINTTINYINT
SMALLINT
TINYINT UNSIGNED
SMALLINT
INT
MEDIUMINT
SMALLINT UNSIGNED
INT
BIGINT
INT UNSIGNED
BIGINT
BIGINT UNSIGNEDDECIMAL(20, 0)
REAL
FLOAT
FLOAT
DOUBLEDOUBLE
NUMERIC(p, s)
DECIMAL(p, s)
where p <= 38
DECIMAL(p, s)
NUMERIC(p, s)
DECIMAL(p, s)
where 38 < p <= 65
STRINGThe precision for DECIMAL data type is up to 65 in MySQL, but the precision for DECIMAL is limited to 38 in Flink. So if you define a decimal column whose precision is greater than 38, you should map it to STRING to avoid precision loss.
BOOLEAN
TINYINT(1)
BIT(1)
BOOLEAN
DATEDATE
TIME [(p)]TIME [(p)]
TIMESTAMP [(p)]
DATETIME [(p)]
TIMESTAMP [(p)]
CHAR(n)CHAR(n)
VARCHAR(n)VARCHAR(n)
BIT(n)BINARY(⌈n/8⌉)
BINARY(n)BINARY(n)
VARBINARY(N)VARBINARY(N)
TINYTEXT
TEXT
MEDIUMTEXT
LONGTEXT
STRING
TINYBLOB
BLOB
MEDIUMBLOB
LONGBLOB
BYTESCurrently, for BLOB data type in MySQL, only the blob whose length isn't greater than 2,147,483,647(2 ** 31 - 1) is supported.
YEARINT
ENUMSTRING
JSONSTRINGThe JSON data type will be converted into STRING with JSON format in Flink.
SETARRAY<STRING>As the SET data type in MySQL is a string object that can have zero or more values, it should always be mapped to an array of string

Features

Multi-database multi-table synchronization

Mysql Extract node supports whole database and multi-table synchronization. After this function is enabled, the Mysql Extract node will compress the physical fields of the table into a special meta field 'data_canal' in the 'canal-json' format, and can also be configured as a metadata field 'data_debezium' in the 'debezium-json' format.

Configuration parameters:

ParameterRequiredDefault ValueData TypeDescription
migrate-alloptionalfalseStringEnable the entire database migration mode, all physical fields are obtained through the data_canal field
table-nameoptionalfalseStringThe regular expression of the table to be read, use "." to separate between database and table, and use "," to separate multiple regular expressions
database-nameoptionalfalseStringThe expression of the library to be read, multiple regular expressions are separated by ","

The CREATE TABLE example demonstrates the function syntax:

CREATE TABLE `table_1`(
`data` STRING METADATA FROM 'meta.data_canal' VIRTUAL)
WITH (
'inlong.metric.labels' = 'groupId=1&streamId=1&nodeId=1',
'migrate-all' = 'true',
'connector' = 'mysql-cdc-inlong',
'hostname' = 'localhost',
'database-name' = 'test,test01',
'username' = 'root',
'password' = 'inlong',
'table-name' = 'test01\.a{2}[0-9]$, test\.[\s\S]*'
)